User Interfaces; Status Led; Jumper - MTX -GTW II User Manual

3. User Interfaces

3.1 Status LED

The MTX-GTW II has four LEDs to inform the user about different status conditions. The following table
shows the different LED indications.
LED STATUS REMARK
On when power good
1 General purpose indicator 1
2 General purpose indicator 2
3 General purpose indicator 3

3.2 Jumper

The MTX-GTW II has two shunt banks for configuration purposes. The following tables show information
about the signals connected to each one.
MTX-GTW II | 2017/12
MTX © by MATRIX ELECTRONICA S.L.U.
mtxm2m.com | gsmsupport@matrix.es
28