Advertisement
SC SYSTEM 3 QUICK START GUIDE (VIRTUAL DJ LE)
DECK MODE SWITCH
TRACK GAIN
LOOP
VINYL
FX Mode: Turns on BEATGRID Effect
EQ Mode: Mid EQ Kill
LOOP Mode: Reloop
VINYL Mode: Scratch/Pitch Bend
FX Mode: FX Select BACK
EQ Mode: Low EQ Kill
LOOP Mode: Temp Short Loop Toggle
VINYL Mode:Pitch Bend (Slower)
PLAY
DECK TRANSPORT CONTROLS
::
FX – Sets the unit into FX control mode
EQ – Sets the unit into EQ control mode
LOOP – Sets the unit into LOOP control mode
TRIG – Sets the unit into CUE point control mode
VINYL – Sets the unit into DECK control mode
DECK - Switches between decks in VirtualDJ
FX
EQ
TRIG
PITCH FADER
DECK
FX Mode: Turns on FLANGE effect
EQ Mode: Hi EQ Kill
LOOP Mode: Short/Long Loop Toggle
VINYL Mode: Keylock On/Off
FX Mode: Parameter Control (Center On/Off)
EQ Mode: EQ Control
LOOP Mode: Loop Trigger/Size
VINYL Mode: Scratch/Pitch Bend
(Outer Ring FAST, Inner Ring SLOW)
FX Mode: FX Select FORWARD
EQ Mode: Reset EQ sliders to zero
LOOP Mode: Temp Long Loop Toggle
VINYL Mode: PitchBend (faster)
CUE
SYNC
TAP
DECK SWITCH
A
C
TRACK VOLUME
CUE BUTTONS/
MIXER SCREEN SWITCH
CROSSFADER
Controls the audio crossfader. To additionally control the video crossfader, just link the crossfader
by clicking on the LINK option on the Video panel. LINK is found just above the right set of deck
selection buttons on the VirtualDJ skin. Crossfader LED shows the crossfader's current position
relative to the center point.
B
D
Standard mode: Filter control for the respective deck.
EQ mode: * Same as Standard mode
FX mode: Access to the FX's first parameter slider
EQ/STANDARD MODE
Low, Mid and High Equalization
EFFECTS MODE
Effects Parameters 2,3 & 4
FX: Toggles the control of the 8 touch buttons and
sliders to control FX functionality for each deck.
FX LED: Red activated and PURPLE deactivated
EQ: Toggles the control of the 8 touch buttons and
sliders to control EQ for the appropriate deck.
EQ LED: BLUE activated and PURPLE deactivated
TRACK VOLUME
MASTER
STANDARD MODE / LEDs PURPLE:
Access Hot Cue Points 1 thru 4.
EQ MODE – LEDs BLUE:
EQ Kills High, Mid, Low and EQ Reset.
FX MODE – LEDs RED:
Top (First) button; Activate/Deactivate
the selected effect. Bottom two buttons;
navigate through the effects forward and
backwards.
Advertisement
