Assistance Settings; Messages; Create And Send Text Message (Sms) - Doro 1370 Manual

3. Press Ok to confirm.
Note! You must write a message if you activate the SMS function.

Assistance settings

Confirm with "0"
You can activate the Confirm with "0" function. This is especially recom-
mended if there is a risk that the assistance call is answered by a voice mail
or answering service. If the recipient doesn't press 0 within 60 seconds
the call will be disconnected and the next number in the sequence will be
called. If the recipient presses 0 within 60 seconds, the call is confirmed
and no further call attempts will be made (assistance sequence
interrupted).
Press Menu � Settings � Assistance � Confirm with "0".
1.
2. Select On to enable, or Off to disable.
3. Press Ok to confirm.
Signal type
Select the notification signal type for the assistance sequence.
Press Menu � Settings � Assistance � Signal type:
1.
High to use loud signals (default).
•
Low to use one low signal.
•
Silent no sound indication, like a normal call.
•
2. Press Ok to confirm.

Create and send text message (SMS)

Note! Before you can send any text messages, you need to save your
message centre number. The number to your service centre is supplied by
your service provider and is usually set on the SIM card. If not, you can
enter the number yourself. See SMS centre, p.26.
1. Press shortcut button
or press Menu � Messages � Create new � SMS.
2. Write your message, see Enter text
English

Messages

,
, p.6, then press To.
22