Table of Contents
Advertisement
JOBNAME: 1st Edition PAGE: 6 SESS: 2 OUTPUT: Tue Jul 24 09:46:13 2007
Headlamp High/Low-Beam Changer
OIE-ID = 1879663 Owner = cparke01 LMD = 19-jun-2007 LMB = cparke01
To change the headlamps from low beam to high or high
beam to low, push the turn signal lever all the way
towards the instrument panel and release it.
Flash-to-Pass
OIE-ID = 1350734 Owner = cparke01 LMD = 11-apr-2006 LMB = cparke01
This feature lets you use your high-beam headlamps to
signal a driver in front of you that you want to pass.
To flash the high beams from low beam, pull the turn
signal/multifunction lever all the way towards you.
Then release it.
Windshield Wipers
OIE-ID = 1851024 Owner = cparke01 LMD = 19-jun-2007 LMB = cparke01
2008 - Saturn VUE Owner Manual (July 23, 2007)
This indicator light turns on
in the instrument panel
cluster when the high
beams are on.
808597
Clear ice and snow from the wiper blades before using
them. If the wiper blades are frozen to the windshield,
gently loosen or thaw them. If the blades do become
damaged, install new blades or blade inserts. See
Windshield Wiper Blade Replacement on page 295.
Heavy snow or ice can overload the wiper motor. A
circuit breaker will stop the motor until it cools down.
Clear away snow or ice to prevent an overload.
The lever on the right side of the steering column
operates the windshield wipers. Push up or pull down
on the lever to place it in one of the following positions.
8
(Mist): Pull the lever down and release it for a
single wiping cycle. The lever will return to its original
position. For more cycles, hold the lever down
1850894
133
Advertisement
Chapters
Table of Contents
