Q-See Presidio Series Quick Start Manual page 7

Option B: VGA Monitor
1. Plug a VGA cable (not included) into the NVR's
VGA port. VGA might not support full high definition
output.
2. Connect the other end of the VGA cable to the
monitor. A 19" monitor or larger with 1280 x 1024
resolution is highly recommended.
3. Plug the monitor into a surge protector.
19" Monitor
or Larger
7
Step 4: Connect Mouse
Plug the included mouse into the USB port on the
back of the NVR. If your model has two USB ports on
the back, either one will work.