Advertisement
Quick Links
1 Description / Specifi cations
(DOUBLE SIDED TAPE MOUNTED TO PLATE)
SELF-DRILLING MOUNTING SCREWS (2)
(WIRING HARNESS NOT SHOWN)
2 Precautions
Shut off all power in access control circuit before attempting any wiring procedures.
Maintain a clean & safe environment when working in public areas.
Constantly be aware of pedestrian traffi c around the door area.
Always stop pedestrian traffi c through the doorway when performing tests that may result in unexpected reactions by the door.
ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge. Before handling any board
ensure you dissipate your body's charge.
Always check placement of all wiring before powering up to insure that moving door parts will not catch any wires and cause
damage to equipment.
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10/19) upon completion of installation.
DO NOT attempt any internal repair of the Piezo Button. All repairs and/or component replacements must be performed by
BEA, Inc. Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product will result in a voided product warranty.
3 Installation
1. The Doorswitch is designed to be a plug-and-go connection to the LO-Llinx modules.
2. If the Doorswitch is to be wired to a door that is NOT using the LO-Linx module,
cut off the connector, strip the wires and wire as shown above.
4 Company Contact
Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please
call BEA, Inc. If you must wait for the following workday to call BEA, leave the door inoperable until satisfactory repairs
can be made. Never sacrifi ce the safe operation of the automatic door or gate for an incomplete solution.
The following numbers can be called 24 hours a day, 7 days a week. For more information, visit www.beasensors.com.
75.5189.01 20071101
FACE PLATE
TOGGLE SWITCH
20.5078
HOLD SWITCH
NOTE: Cut-off connector
ONLY if wiring
directly to operator.
US and Canada:
1-866-249-7937
Canada:
1-866-836-1863
Northeast:
1-866-836-1863
DOORSWITCH
USER'S GUIDE
DESCRIPTION
DIMENSIONS
MATERIAL
SWITCH RATING
DOOR SWITCH
RE D
1a
ON
BLACK
1
OFF
W HITE
HOLD
1b
OPEN
Southeast:
1-800-407-4545
Midwest:
1-888-308-8843
West:
1-888-419-2564
TOGGLE SWITCH
SPECIFICATION
2.50" (64mm) L
1.50" (38mm) H
1.75" (44mm) D
Anodized Aluminum
10A 125VAC
6A 250VAC
On-Off-On
DOOR CONTROL
COMMON
ACTIVATION
SAFETY
ACTIVATING
DEVICES
Page 1 of 1
Advertisement
