Advertisement
GLOBAL
Contract
INSTALLATION GUIDELINES
Flip top tables
4. Unbolt the pre-installed foot from it's column. Insert the slotted bolt in the channel.
Reconnect the foot and column. Tighten the bolt with washer and nut 4 7/8"
from the bottom at the foot connection.
5. Connect the modesty panel bracket as shown.
Insure that nylon washers (A) are installed on either side
of the modesty bracket.
A
6. Attach modesty panel. Using guide block position panel 1 7/8"
below support beam and screw in place.
Page
77
• globalcontract.com
globalfurnituregroup.com
TERINA INSTALLATION GUIDE
4
7/8"
1
7/8"
• Fall 2017
5
Advertisement
