Advertisement
Contract
GLOBAL
TERINA INSTALLATION GUIDE
Flip Top Tables
Pre Assembled Components
Legs
Legs
1. Connect the leg to cross beam.
Pivot Bracket
4. Remove end cap from the end
of the support beam.
6. Connect the base to the support beam.
Insure that black nylon washers (A) are installed between the pivot bracket and the assembly.
A
2
Required Tools
Safety Glasses
Allenkeys
Cross Beam
5. Ensure pivot bracket is installed 3 9/16" from the end of the extrusion. Replace the end cap.
A
INSTALLATION GUIDELINES
Drill
Phillips Bit
Cable Release/Support Beams
2. Snap on black plastic cover to
conceal connection.
Measuring Tape
Spacer Block
3 9/16" x 1 7/8" (included)
3. Snap support block into channel
on top of cross beam.
B
globalcontract.com
• Fall 2017
Wrench
C
3
9/16"
•Page
74
globalfurnituregroup.com
Advertisement
