Advertisement
Contract
TERINA INSTALLATION GUIDE
Optional Modesty Panel
1. Remove end cap and insert bolt into the inside slot. Use the rubber mallet to
secure the end cap in original position.
2. Use the guide to position the bolt with washer and nut 1 7/8" from the end.
Tighten nut in place.
3. Connect the modesty bracket as shown.
Insure that nylon washers (A) are installed on either side of the modesty
bracket.
A
4
INSTALLATION GUIDELINES
1
7/8"
globalcontract.com
•Page
globalfurnituregroup.com
• Fall 2017
76
Advertisement
