Remote Control Unit (Display) - Sanyo KHS2432 Instruction Manual

Displayed when main unit sensor is in use
(1) Operation mode
AUTO.......................................
COOLING.................................
HEATING .................................
FAN ..........................................
(2) Fan speed
Automatic operation ..............
HIGH ........................................
MEDIUM..................................
LOW.........................................
8

Remote Control Unit (Display)

"ROOM TEMP" is displayed when the temperature setting has
not been made.
Symbols
"TEMP" is displayed when setting temperature.
Displayed when transmitting data
Displayed when temperature is
shown
Displayed when the temperature
setting is at the upper or lower
allowable limit
Displayed when setting timer
(3) Set temperature
60 – 86 °F
When set to 82 °F ...........
Current temperature
indication .........................
(4) Timer
24-hour clock with ON/OFF
Program Timer .......................
24-hour ON Timer ..................
24-hour OFF Timer.................
1-hour OFF Timer...................
(5) NIGHT SETBACK ....................
(6) Confirmation of
transmission ...........................
(7) Sweep indication....................
F
ON
OFF
HR.
1
OI-212-08EG