Manual Operation - Sanyo KHS2432 Instruction Manual

2. Manual Operation

NOTE
14
Operation with the Remote Control Unit (continued)
STEP 1
STEP 5
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit are not satisfactory, press the
setting buttons below to change the settings as desired.
STEP 1 Press the MODE selector button and select the desired
mode.
For heating operation
For cooling operation
STEP 2 To start
operation button.
STEP 3 Press
temperature setting to the desired temperature.
Adjustable temperature range:
STEP 4 Set the FAN SPEED selector button to the setting you
want.
If the fan speed is set to
NOTE
switches
between
temperature setting.
STEP 5 Press the FLAP button and set the airflow direction as
desired.
(Refer
page 21.)
To stop the air conditioner, press the ON/OFF operation button again.
the air conditioner,
the TEMP. setting buttons
(Automatic), the fan speed
automatically according
the actual room
to ''Adjusting the
STEP 2
STEP 3
STEP 4
press the ON/OFF
to change the
86 °F max.
60 °F min.
to the difference
temperature and the
Airflow Direction'' on
OI-212-14EG