Download Print this page

Vax TBT3V1B1 Let's Get Started page 9

Cordless blade series. cordless slim vac with detachable handheld
Hide thumbs Also See for TBT3V1B1:

Advertisement

PLEASE READ 'LET'S TALK SAFETY' BEFORE USE
CAUTION: The battery used in this device may present a risk of fire or chemical burn if mistreated. Do not
disassemble or heat above manufacturer's maximum temperature limit (60°C/140°F) or incinerate. Use of
another battery may present a risk of fire or explosion. Dispose of used battery promptly. Keep away from
children. Do not disassemble and do not dispose of in a fire. Do not attempt to disassemble the battery or
remove any component projecting from the battery terminals. The battery and charger have no user
serviceable parts. Fire or injury may result. Prior to disposal, protect exposed terminals with heavy insulating
tape to prevent shorting. The battery is to be disposed of safely at your local battery recycling centre.
Do not attempt to recharge non-rechargeable batteries. The battery must be removed from the
appliance before it is scrapped. The appliance must be disconnected from the charger/supply mains
before use and when removing or installing the battery into the machine. In case of battery leakages
avoid any contact with the skin.
Charging the cordless slim vac
NOTE: The initial charge is 4 hours and charging will be required before first use. The slim vac can be
charged as a handheld with the reach wand and tools removed or as an upright attached to the wall
bracket. Failure to fully charge the battery before first use (initial charge 4 hours) may result in poor
battery performance. The machine can remain on the battery charger once fully charged. The life
expectancy of the battery will vary depending on the usage of the slim vac.
WARNING: Do not use the slim vac when the machine is plugged in and charging.
To charge the machine
(as a handheld) detach
the reach wand and tools
and place the handheld
on a flat, stable surface.
You can also charge as
an upright slim vac when
attached to the wall
bracket.
Insert the charger lead
into the charging port
located underneath the
nozzle on the handheld.
Getting started
Plug the charging plug
into the mains.

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Tbt3v1p1Tbt3v1p2Tbt3v1b2Tbt3v1h1Tbt3v1f1