Vax TBT3V1B1 Let's Get Started page 16

Taking care of your machine
Cleaning the separator
Press the handheld
release clip. Pull and
remove the reach wand
or the accessory that is
attached to the handheld.
Twist the filter cover
anticlockwise to unlock.
Pinch the round foam
filter inside the top of
the separator and pull
to remove. Tap both
parts over a bin to
remove dirt/debris.
Hold the handheld over a bin and press the dirt
release button to allow dirt/debris to fall out.
Pull and remove the filter
cover from the handheld.
Wash the foam filter and
the separator under running
water (40°C max).
Press the dirt release
button to open the dirt
container.
24hr
Leave for 24hrs or until
fully dry before refitting
the filter back into the
slim vac.
To release the separator,
push from inside the dirt
container and pull out the
separator to remove.