Problem Solving Guide - Miele CSDA7000FL Operating And Installation Instructions

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem
The SmartLine element
cannot be switched on.
The power levels 1 to B
light up one after the
other.
Cause and remedy
There is no power to the SmartLine element.
 Check whether the mains fuse has tripped. Con-
tact an electrician or Miele Service (for the min-
imum fuse rating, see data plate).
There may be a technical fault.
 Disconnect the appliance from the mains electri-
city supply for approx. 1 minute by
– tripping the relevant mains fuse or screwing the
fuse out completely, or
– switching off the residual current protection
device.
 If, after resetting the trip switch in the mains fuse
box or the residual current protection device, the
appliance will still not turn on, contact a qualified
electrician or Miele Service.
An automatic reset is performed after an interruption
to the power supply.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Problem solving guide

23