User Manual Thanks for choosing ImportAppliances for your kitchen appliance purchase. We hope you are enjoying the convenience, quality and affordability of your new appliance. If you have any issues or questions, please contact us via email: info@ImportAppliances.com THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Operating and installation instructions SmartLine downdraft extractor To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 10 746 530 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Contents Warning and Safety instructions................ 4 Caring for the environment ................ 13 Guide to the appliance .................. 14 Downdraft extractor....................14 Controls / Indicators....................15 Cleaning the SmartLine element for the first time ........... 16 Modes of operation ..................... 17 Tips on saving energy ..................
Contents Worktop cut-out for flush-fit installation............ 36 Flush-mounted installation................. 39 Spacer bars...................... 40 Installation...................... 42 Preparing the worktop................... 42 Fitting the spacer bars ..................43 Installing the countertop extractor ................ 44 E-box ........................45 Connection for air extraction ................ 48 Electrical connection ..................
This prevents both personal injury and dam- age to the appliance. Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep these instructions in a safe place and pass them on to any future owner.
Warning and Safety instructions Correct application This downdraft extractor is intended for use in domestic house- holds and similar working and residential environments. The downdraft extractor is not suitable for outdoor use. It must only be used as a domestic appliance to extract vapours and remove odours from cooking.
Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the downdraft extractor unless they are constantly supervised. Children aged 8 and older may only use the downdraft extractor without supervision if they have been shown how to use it in a safe manner.
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and re- pairs must only be carried out by a Miele authorised technician. The downdraft extractor must only be installed and operated in combination with those SmartLine elements and hob units specified by Miele.
The manufacturer's warranty will be invalidated if the downdraft extractor is not repaired by a Miele approved service technician. Miele can only guarantee the safety of the appliance when genu- ine original Miele replacement parts are used. Faulty components must only be replaced by Miele spare parts.
Warning and Safety instructions Using at the same time as other heating appliances that depend on the air from the room Danger of toxic fumes! Great care should be taken when using the downdraft extractor in the same room or the same area of the house as another heating appliance that depends on the air from the room.
Warning and Safety instructions In order to ensure safe operation and to prevent gases given off by the heating appliance from being drawn back into the room, when the downdraft extractor and the heater are both operated simultan- eously, an underpressure in the room of 0.04 mbar (4 Pa) is the maximum permissible.
Warning and Safety instructions Correct use Open flames are a fire hazard! Never use an open flame beside the downdraft extractor. To avoid the danger of fire, do not flambé or grill over an open flame. When switched on, the downdraft extractor could draw flames into the fil- ter.
There is a risk of fire if the cooker hood is not cleaned as de- scribed in these operating instructions. Accessories Only use genuine original Miele accessories and spare parts with this appliance. Using accessories or spare parts from other manu- facturers will invalidate the warranty and Miele cannot accept liabil- ity.
/ recycling centre for electrical and electronic ap- pliances, or contact your dealer or Miele for advice. You are also respons- ible (by law, depending on country) for deleting any personal data that may be stored on the appliance being disposed of.
Guide to the appliance Downdraft extractor a FlameGuard b Grease filter c Cover with control unit d Casing e Grease trap f Air duct g Fan h E-box THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Cleaning the SmartLine element for the first time Please stick the extra data plate for the appliance supplied with this doc- umentation in the space provided in the “After sales service” section of this booklet. Remove any protective wrapping and stickers.
Modes of operation Depending on the model of the downdraft extractor, the following op- tions are available: Extraction mode The air is drawn in and cleaned by the grease filter and directed outside. Recirculation mode (DUU 1000(-1) conversion kit required) The air is drawn in and cleaned by the grease filter.
Tips on saving energy This downdraft extractor operates very efficiently and economically. The follow- ing will help you to save even more en- ergy when using it: – It is important to ensure that the kit- chen is well ventilated during opera- tion.
Operation Booster FlameGuard The maximum duration for the Booster is 10 minutes. To switch it off early, set a different power level. Switching the downdraft ex- tractor off Touch the sensor control. Install the FlameGuard when you are The sensor controls go out.
Cleaning and care Allow the SmartLine element to cool Danger of burning. down before cleaning. The downdraft extractor and the cooking elements must be switched Clean the SmartLine element and ac- off. The cooking elements need to cessories after each use. have cooled down.
This discolouration cannot be removed. Clean the ceramic surface regularly with a suitable ceramic cleaning agent such as the Miele ceramic and Hold the drip tray and open the stainless steel hob cleaner. 2 clips (1x front, 1x rear). Carefully re- move the tray from the casing, mak- ...
Cleaning and care Select a dishwasher programme with Grease filter a wash temperature between 50 °C The reusable metal grease filter re- and 65 °C. moves solid particles from kitchen va- pours (grease, dust, etc.) and therefore Depending on the detergent used, prevents soiling of the downdraft ex- cleaning the grease filter in a dish- tractor.
There is no power to the SmartLine element. cannot be switched on. Check whether the mains fuse has tripped. Con- tact an electrician or Miele Service (for the min- imum fuse rating, see data plate). There may be a technical fault.
Ceramic and stainless steel These products can be ordered through the Miele Webshop. hob cleaner 250 ml They can also be ordered from Miele (see end of this booklet for contact de- tails) or from your Miele dealer. Removes heavy soiling, limescale de-...
(e.g. a drawer) or be subject to mechanical loads which could damage it. Combination with gas appliances Only Miele CS 7xxx gas appliances may be installed next to the downdraft extractor. Observe carefully the safety clearances listed on the following pages.
Installation notes Tiled worktop All dimensions are given in mm. Onset installation Sealing between the SmartLine Ele- ment and the worktop Grout lines and the hatched area un- derneath the SmartLine element frame must be smooth and even. If they are not, the SmartLine element will not sit flush with the worktop and the sealing strip underneath the top part of the ap-...
Installation notes The SmartLine element is Flush-fit installation – directly installed in a suitable cut-out Flush-fit installation is only possible in in a natural stone worktop, natural stone (granite, marble), solid wood and tiled worktops. For installa- – secured in a suitable cut-out in solid tion in worktops made of other materi- wood and tiled worktops with a als, please consult the relevant manu-...
Installation notes Installing several SmartLine Housing unit back panel elements The extraction ducting is laid behind the housing unit back panel. The back The gaps between the individual Smart- panel must be removable for mainten- Line elements are sealed with a silicone ance purposes.
Building-in dimensions Flush-fit installation a Front d 12 mm wooden frame (not supplied, for detailed illustrations, see “Work- b Fan (in the plinth on the floor) top cut-out for flush-fit installation”) c Stepped cut-out (for detailed illustra- e Air duct tions, see “Worktop cut-out for flush- f E-box fit installation”) THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Worktop cut-out for onset installation Information for calculating the cut-out The elements overlap the worktop by 10 mm. When installing several elements, a distance of 2 mm must be observed between the individual elements. Calculating cut-out dimension B 1 element = width of the element minus 10 mm on the right, minus 10 mm on the left Several elements = total width of the elements plus 2 mm distance between the elements, minus 10 mm on the right, minus 10 mm on the left.
Worktop cut-out for onset installation Installation with a downdraft extractor Sample combinations Number x width [mm] Dimen- sion B Cooking Downdraft [mm] elements extractor 1 x 378 1 x 120 2 x 378 1 x 120 1 x 378 2 x 120 1224 1 x 620 3 x 378 2 x 120 1362 2 x 378 2 x 120 1604 1 x 620 4 x 378 2 x 120 1742 1 x 620 2 x 120 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Worktop cut-out for onset installation Installation without a downdraft extractor Sample combinations Number x width [mm] Dimension B [mm] Cooking elements 1 x 378 2 x 378 1 x 378 1 x 620 3 x 378 1118 2 x 378 1360 1 x 620 4 x 378 1498 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Surface-mounted installation Natural stone worktops If the worktop is more than 24 mm deep, it must be cut-away on the un- You will need heavy-duty double-side derside on the right or left hand side. tape (not supplied) to secure the bracket. a Worktop ...
Worktop cut-out for flush-fit installation Natural stone worktop Wooden worktop + 0.5 mm for CS 7611 Information for calculating the cut-out The elements overlap the worktop by 10 mm. When installing several elements, a distance of 2 mm must be observed between the individual elements.
Worktop cut-out for flush-fit installation Installation with a downdraft extractor Sample combinations Number x width [mm] Dimen- Dimen- sion A sion B Cooking Downdraft [mm] [mm] elements extractor 1 x 378 1 x 120 2 x 378 1 x 120 1 x 378 2 x 120 1248 1224 1 x 620 3 x 378 2 x 120 1386 1362 2 x 378 2 x 120 1628 1604 1 x 620 4 x 378...
Worktop cut-out for flush-fit installation Installation without a downdraft extractor Sample combina- Number x width Dimension A Dimension B tions [mm] [mm] [mm] Cooking elements 1 x 378 2 x 378 1 x 378 1004 1 x 620 3 x 378 1142 1118 2 x 378 1384 1360 1 x 620 4 x 378 1522 1498 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Flush-mounted installation Natural stone worktops If the worktop is more than 28 mm deep, it must be cut-away on the un- You will need heavy-duty double-side derside on the right or left hand side. tape (not supplied) to secure the bracket. a Worktop ...
Spacer bars When installing several SmartLine elements, an additional spacer bar must be fit- ted in between the individual elements. The clips supplied with the spacer bars are only required for installing the CSDA. Installing 3 elements and 2 spacer bars Onset installation Flush-fit installation THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Spacer bars Spacer bars for the downdraft extractor Onset installation a Clips Flush-fit installation a Clips THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Installation Preparing the worktop Create the worktop cut-out. Remem- ber to maintain the minimum safety distances (see “Safety distances”). Seal any cut surfaces on wooden worktops with a special varnish, sil- icone rubber or resin to prevent the wood from swelling as a result of moisture.
Installation Natural stone worktops Fitting the spacer bars Use the middle screw holes if one of the You will need heavy-duty double-side following SmartLine elements is in- tape (not supplied) to secure the stalled to the right or left of the spacer spacer bars.
Installation Installing the countertop ex- tractor The countertop extractor can be in- stalled with the connector for the air duct on either the right or the left side. Remove the grease trap from the cas- ing. a Connector for air duct on the right ...
Installation E-box The connection cable of the switch- ing system must comply with type H03VV-F 2 x 0.75 mm and must not exceed 2.0 m in length. The switching system must be equipped with a potential-free con- tact suitable for 230 V, 1 A. The ex- tractor is switched off when the switch is open.
Installation Loosen the lug and pull the plug out. Connecting the e-box Connect the operating voltage and fan control cables to the e-box and the fan. Connect the control unit cable to the e-box. The socket positions are designed in such a way that they cannot be mixed ...
Installation Sealing the gaps Seal the gaps between the individual SmartLine elements, and between the flush-mounted SmartLine elements and the worktop, with a silicone seal- ant that is heat-resistant to at least 160 °C. Unsuitable sealant can damage nat- ural stone. For natural stone worktops and nat- ural stone tiles, only use silicone sealant that is specially formulated...
Connection for air extraction If the downdraft extractor is used at the same time as a heating appli- ance that relies on oxygen from the same room, there is a risk of toxic fumes. It is essential that the “Warning and Safety”...
For extra safety, it is advisable to pro- for unauthorised work. tect the SmartLine element with a suit- Miele cannot be held liable for dam- able residual current device (RCD) with age or injury caused by the lack of or a trip range of 30 mA.
These Safety fuses cables are available from the manufac- Completely remove fuses turer or from the Miele Spare Parts De- partment. Automatic circuit breakers Press the (red) button until the middle (black) button springs out.
In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. Contact information for Miele Service can be found at the end of this document. Please note that telephone calls may be monitored and recorded for training pur- poses and that a call-out charge will be applied to service visits where the problem could have been resolved as described in this booklet.
The following data sheets apply to the models described in this operating instruc- tion manual. Data sheet for household cooker hoods In acc. with delegated regulation (EU) No. 65/2014 and regulation (EU) No. 66/2014 MIELE Model name / identifier CSDA 7000 Annual Energy Consumption (AEC 29,3 kWh/year...
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Fax: 011-46 900 001 Fax: +65 6735 1161 800-MIELE (64353) E-mail: firstname.lastname@example.org E-Mail: email@example.com E-Mail: firstname.lastname@example.org Internet: www.miele.in Internet: www.miele.sg Website: www.miele.ae Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
CSDA 7000 FL en-GB M.-Nr. 10 746 530 / 03 THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.