Operation; Flameguard; Switching The Countertop Extractor On; Setting/Changing The Power Level - Miele CSDA7000FL Operating And Installation Instructions

Smartline downdraft extractor
Table of Contents

Advertisement

FlameGuard

 Install the FlameGuard when you are
operating a gas hob or a gas wok
burner directly next to the downdraft
extractor.
Switching the countertop ex-
tractor on
The countertop extractor must only be
operated when the flame guard has
been removed.
 Remove the FlameGuard.
 Activate the  touchpad.
The sensor controls light up.
If no further entry is made, the coun-
tertop extractor will switch itself off
after a few seconds.
Setting/changing the power
level
For light to heavy cooking vapours and
odours, select from power levels 1 to 3.
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, select Booster
setting  B.
 Touch the desired power level.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Booster
The maximum duration for the Booster
is 10 minutes.
 To switch it off early, set a different
power level.
Switching the downdraft ex-
tractor off
 Touch the  sensor control.
The sensor controls go out.
If the downdraft extractor is not
switched off, it will switch itself off
12 hours after the last automatic oper-
ation.

Run-on time

In order to rid kitchen air of steam and
odours, the downdraft extractor contin-
ues to run for 5 minutes on the power
level that was set last. The power level
is gradually reduced during the run-on
time. The current power level pulsates
during the run-on time.

Operation

19

Advertisement

Table of Contents
loading

Table of Contents