What To Do If It Goes Wrong - Vax VCWRS700 Manual

What to do if it goes wrong

Problem
The cleaner won't run.
Cleaner won't pick
up/loss of suction.
Liquid escaping from
the carpet washer.
Clean solution won't
dispense.
Solution
• Not properly plugged into electrical outlet. Plug in rmly.
• No electricity in electrical outlet. Check fuse or breaker.
• On/o switch not turned on. Push on/o switch to 'on'.
• Blown fuse/tripped breaker. Reset circuit breaker or replace fuse.
• Dirty water tank is full. Switch o and unplug cleaner. Empty dirty
water tank.
• Dirty water tank not installed correctly. For tting information, refer to
"Replacing Dirty Water Tank" in the "Taking Care of your machine" section.
• Obstruction in hose/nozzle. Solution: Remove hose and clear obstruction.
• Dirty water tank is full. Switch o and unplug cleaner. Empty dirty water tank
refer to "Emptying the Dirty Water Tank" in the "Taking Care of your machine"
section.
• Dirty water tank not installed correctly. For tting information, refer to
"Replacing Dirty Water Tank" in the "Taking Care of your machine" section.
• Solution tank not installed correctly. Make sure the tank is securely locked in place.
• Solution tank not installed correctly. Make sure the tank is securely
locked in place.
• Solution tank empty. Re ll tank. Refer to "Using you machine" section.
• Handle not tted correctly. Solution: Ensure handle is tted correctly.