Auxiliary Functions; Warning Indicators; Starting The Program; Child Lock - Blomberg DV 17600 W Owner's Manual

Drying level
Use for heavy-duty fabrics in to be
Super very dry
Extra Use for extra drying
Use fora normal dryness level. It
is recommended level fora energy
Normal saving.
Damp Items can be partially damp

5.5 Auxiliary functions

Buzzer / time
Drying machine makes an audible warning
when the program is completed. If you don't
want the machine to make an audible warn-
ing, press the "Buzzer / Time" button. When
you press the Buzzer/Time button, a light
will illuminate and no audible warning will be
made when the program ends.
C
You can select this function before
or after the program starts.
Dry/Time level button is used to adjust pro-
gram duration while the timed programs are
selected.
Drying Level
Dry/Time Level button is used for adjusting
to desired dryness level. Program duration
may change depending on the selection.
C
You can activate this function only
prior to start of program.
End time
You can delay the end time of the program
up to 24 hours with End time function.
1. Open the loading door and place the
laundry.
2. Select the drying program.
3. Press the End Time selection button and
set the delay time you wish. End Time
LED will illuminate. (When pressed and
hold the button, End Time proceeds non-
stop).
4. Press the Start / Stand-by button. End
Time countdown starts. ":" Separator
in the middle of displayed delay time
flashes.
C
You can add or remove laundry
within end time. Displayed time
is the sum of normal drying time
and end time. End Time LED will
turn off at the end of countdown,
drying starts and drying LED will
illuminate.
Changing the end time
If you want to change the duration during the
countdown:
Dryer / User Manual
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and repeat the End Time selection
process.
Cancelling the end time function
If you want to cancel the end time countdown
and start the program immediately:
Cancel the program by turning the On/Off/
Program selection knob. Select the program
you want and press the Dry/Time Level but-
ton.

5.6 Warning indicators

C
Warning indicators may vary
depending on the model of your
dryer.
Filter cleaning
When the program is completed, the warning
indicator for filter cleaning turns on.

5.7 Starting the program

Press the Dry/Time Level button to start the
program.
Dry/Time Level and Drying indicators will
illuminate to indicate that program started.

5.8 Child Lock

The drying machine has a child lock which
prevents the program flow from being inter-
rupted when the buttons are pressed during
a program. When the child lock is activated,
all buttons on the panel except the On/Off/
Program selection knob are deactivated.
Press the Buzzer button simultaneously for 3
buttons to activate the child lock.
The child lock has to be deactivated to be
able to start a new program after the current
program is finished or to be able to interfere
with the program. To deactivate the child
lock, keep the same button pressed for 3
seconds.
C
When the child lock is activated,
the child lock warning indicator on
the screen turns on.
Child lock deactivates when the
drying machine is turned off and
on by the On/Off/Cancel knob.
When the drying machine runs
and the child lock is active, it
beeps twice when the program
selection knob is turned. If the
child lock is deactivated without
returning the program selection
knob to its previous position,
program will terminate due to the
change in the program selection
knob position.
19 / EN