Minimum Installation Clearances; Use On Top Of A Washer - Blomberg DV 17600 W Owner's Manual

3.4 Minimum Installation
Clearances
Alcove or
Built-under
Sides 0.59 in. (15 mm)
Top 2.42 in. (61.5 mm) 2.42 in. (61.5 mm)
Rear 0.59 in. (15 mm)
Front 0.2 in. (5 mm)
12 / EN
90
0
Closet
0.59 in. (15 mm)
0.59 in. (15 mm)
0.2 in. (5 mm)
90
0
"
36.14
(918 mm)
min.
33 ¾"
(856,5 mm)
Ventilation Requirements
Closet door must have 2 openings, one
located 3.2 inches (8 cm) from bottom of
door having a minimum area of 16 sq.
inches (103 cm2) and the other one located
3 inches (7.5 cm) from top of door having a
minimum area of 46 sq. inches (294 cm2).

3.5 Use on top of a washer

•A stacking-kit (Part no: 297 956 0100)
should be used between the washer and
dryer for use on top of a washer. The
stacking-kit should be installed by the
Authorized Service provider.
Dryer / User Manual