Installation Instructions; Locating The Amplifier - Wet Sounds SINISTER SDX 2500 Owner's Manual

WARNING
2
We build all Wet Sounds™ products to play at high volumes for extended periods
of time. Your ears however are not designed for high volume listening. This product
can easily generate high volumes that can permanently damage your hearing. We
urge you to limit your exposure to very high volume sound. You may also find your
state has laws governing the volume of an audio system. Please be aware of all
local and state laws in your area.
A Properly tuned and operated audio system will deliver years of enjoyment when
used properly.

INSTALLATION INSTRUCTIONS

Wet Sounds™ Marine Amplifiers are designed for easy installation in your boat. To
ensure proper installation of your new purchase please follow all the suggestions
listed below.
If you do not have experience with marine electrical and mechanical systems,
contact a professional installer. Paying a qualified installer is almost always
cheaper than paying a dealership to repair your boat.

LOCATING THE AMPLIFIER

The amplifier must be securely mounted to a solid surface. Please select a
dry location to mount your amplifier. All Wet Sounds products are designed to
operate in humid environments however direct contact with water can damage
the electronics. Do not mount the amplifier to any area that may have excessive
vibration (like a subwoofer enclosure). Position the amplifier in an area that
receives sufficient airflow for proper heat dissipation.
Wet Sounds Sinister SDX 2500 Owner's Manual