General Safety Rules - Bosch GLL 3-15 Operating Instructions Manual

Read all instructions.
! WARNING
Failure to follow all
instructions listed below may result in
hazardous radiation exposure, electric
shock, fire and/or serious injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE
The term "tool" in the warnings listed below
refers to your mains-operated (corded) tool or
battery-operated (cordless) tool.
The following labels are on your laser tool
for your convenience and safety. They
indicate where the laser light is emitted
by the tool. ALWAYS BE AWARE of their
location when using the tool.
Do not direct the laser beam
at persons or animals and do
not stare into the laser beam
yourself. This tool produces
laser class 2 laser radiation and
complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser
Notice No. 50, dated June 24, 2007. This can
lead to persons being blinded.
Changes or modifications to this equipment
not expressly approved by the party
responsible for compliance could void the
user's authority to operate the equipment.
Use of controls or adjustments or
performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
DO NOT remove or deface any warning or
caution labels. Removing labels increases the
risk of exposure to laser radiation.
ALWAYS make sure that any bystanders
in the vicinity of use are made aware of the
dangers of looking directly into the laser
tool.

General Safety Rules

DO NOT place the laser tool in a position
that may cause anyone to stare into the
laser beam intentionally or unintentionally.
Serious eye injury could result.
ALWAYS position the laser tool securely.
Damage to the laser tool and/or serious injury to
the user could result if the laser tool fails.
ALWAYS use only the accessories that are
recommended by the manufacturer of your
laser tool. Use of accessories that have been
designed for use with other laser tools could
result in serious injury.
DO NOT use this laser tool for any purpose
other than those outlined in this manual.
This could result in serious injury.
DO NOT leave the laser tool "ON"
unattended in any operating mode.
DO NOT disassemble the laser tool. There
are no user serviceable parts inside.
DO NOT modify the product in any way.
Modifying the laser tool may result in hazardous
laser radiation exposure.
DO NOT use the laser viewing glasses as
safety goggles. The laser viewing glasses
are used for improved visualization of the laser
beam, but they do not protect against laser
radiation.
DO NOT use the laser viewing glasses as
sun glasses or in traffic. The laser viewing
glasses do not afford complete UV protection
and reduce color perception.
DO NOT use any optical tools such as, but
not limited to, telescopes or transits to view
the laser beam. Serious eye injury could result.
DO NOT stare directly at the laser beam or
project the laser beam directly into the eyes
of others. Serious eye injury could result.
Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
DO NOT operate the laser tool around
children or allow children to operate the
laser tool. Serious eye injury could result.
-6-
Work area safety