Table of Contents
Advertisement
Mainsheet & Cuningham
1
Position the top double ratchet
block as shown on the
photograph opposite the lower
block. Carefully follow the
threading sequence shown in
the photographs.
The Cunningham line will
already be attached to the tack
(front, lower corner) of the
mainsail. The rope passes
from the tack, down around the
cleat mounted on the rear of
the mast and then back up to
the mainsail. The rope passes
through the eye of the mainsail
tack, then back down to the
cleat and ties off, providing a
3:1 purchase.
NB......Simple tension the
Cunningham till firm. Pull
harder on the Cunningham
for stronger winds.
MAINSHEET SYSTEM
2
Clip the mainsheet block with
the cleat attached onto the
pad-eye located in the center
of the rear cross beam.
CUNNINGHAM
3
The top double block then clips
onto the clew of the mainsail.
•
15
Advertisement
Table of Contents
