Mainsheet System - Hobie teddy Owner's Manual

Ref : MM_TEDDY
HOBIE TEDDY
ASSEMBLY MANUAL

Mainsheet system

Illustration
www.hobiecat.com
Issued by : IR Date : 01/2015 Up-date : 2
Steps Description
The mainsheet system is already mounted. If you
have to change one block, follow the instructions
hereunder to remount it.
Position the triple ratchet block and the triple top
1
block as indicated in the photograph.Carefully
follow the threading sequence shown in the pho-
tographs and you should have no problems. There
should be no crossovers or twists in a properly
threaded 6:1 system.
Fasten the mainsheet ratchet block onto the top of
the main traveller. The mainsheet system is now
ready to be headed to the clew of the mainsail.
NB : It is best to leave the top block unhooked until
the boat is in the water.
2
Thread the tail of the mainsheet line through the
travellet cleat and fairlead of the traveller car and
then secure with a figure 8 knot at the eyesstrap on
the aft edge of the rear crossbar.
Page : 26/32