Front Turn Signal And Parking Lamps - Oldsmobile Aurora 2003 Owner's Manual

4. Lift the tabs to remove the bulb from the assembly.
5. Replace the bulb.
6. Push the bulb assembly in and turn it clockwise to
install the bulb assembly into the headlamp
assembly.
7. Then reconnect the wiring harness to the lamp
assembly.
5-56
8. Slide the lamp assembly back into place by lining
up the track on the bottom of the assembly with
the guide on the vehicle.
9. Then connect the outboard snap mounting pin.
10. Secure the lamp assembly with the two bolts.
Front Turn Signal and Parking
Lamps
Once the headlamp assembly has been removed from
the vehicle, the front turn signal and parking lamps
can be accessed. See Headlamps on page 5-55
for more information on location.