Bulb Replacement
For the type of bulbs, see Replacement Bulbs on
page 5-48.
For any bulb changing procedure not listed in this
section, contact your dealer.
Taillamps and Turn Signal Lamps
1. Open the liftgate.
3. Pull the assembly away from the vehicle.
2. Remove
from the
the two screws
lamp assembly.
4.
5.
6.
7.
8.
Unclip the wiring harness (A) and remove the three
socket retaining screws (B).
Remove the socket by releasing the retaining tabs.
Holding the socket, pull the bulb to release it
from the socket.
Push the new bulb into the socket until it clicks.
Reinstall the socket and screws.
5-47