VersaTables Edison Assembly Instructions Manual page 12

Edison Electric Table
Instructions For Programming Controller With The Presets
Favorite positions e.g. for sitting and/or standing can be stored. Follow the described
procedure.
How to store a position:
1. Drive Table's surface to the height you wish to store.
2. Press 'S' and then the memory button you wish to store that height.
Your position has now been stored.
To recall your memory position, press the memory button until you reach the stored
position.
Images show 4 different height parameters stored on buttons. You can set your own.
How to reset your desk
The desk cannot drive up if it has not been initialized.
If display: error code E01
How to Reset:
1. Press down key and drive to the lowest position.
Hold the key until the desk stops completely.
2. Reactivate the down key and hold the key until the desk stops completely.
Now the desk can drive up.
VersaTables.com
14105 Avalon Blvd.
Los Angeles, CA 90061
How To Store a Memory Position
Table Will Not Go Up Only Down.
Proudly Made in the USA
Assembly Step-by-Step
How can we improve our assembly instructions?
Your comments and suggestions are important to us.
Please e-mail us at: service@versaproducts.com.
Sales:
Call: 800-416-3961 Call: 424-244-2155
Call: 310-353-7100
Fax: 310-353-7109
ELE-TB
Customer Service:
service@versaproducts.com