Picture Control Adjustment In The Component And Pc Mode - Sansui HDLCD2600 Owner's Manual

Picture control adjustment in the Component and PC mode

You can adjust to optimize the
performance of the TV in the
Component and PC mode.
NOTE:
• If no buttons are pressed for more
than approx. 30 seconds, the Menu-
screen will return to normal Monitor-
screen automatically.
• The "Component Set" and "PC Set"
settings are not effective for other
input modes.
Example: Adjust the H-Pos in the component mode.
1
Press INPUT SELECT repeatedly to select the component
mode.
2
Press MENU during the
component mode. Then press
▲ or ▼ to select "Feature"
menu, then press
3
Press ▲ or ▼ to select
"Component Set", then press
or ENTER.
4
Press ▲ or ▼ to select
"H-Pos", then press
ENTER.
5
Press or to adjust the
setting.
▲ or ▼ to change the
• Press
adjusting item.
H-Pos:
V-Pos:
Clock:
Phase:
Auto Adjust
(PC Setting only):
Setting:
6
Press MENU to return to the normal screen.
Sleep Timer
Picture
Advanced Video Menu
Component Set
Audio
.
Setup
Feature To Move
Sleep Timer
Picture
Advanced Video Menu
Component Set
Audio
Setup
Feature To Move
C o m p o n e n t s e t t i n g - 7 2 0 x 4 8 0 p @ 6 0 / 5 9 . 9 4 H z
H-Pos
or
V-Pos
Clock
Phase
Auto Adjust
Setting
To Move
H-Pos
To adjust the horizontal position of the
image on the Component or PC mode.
To adjust the vertical position of the
image on the Component or PC mode.
To minimize any vertical bars or stripes
visible on the screen background.
This must be adjusted after the frequency
of the Component or PC mode has
been set to 60hz to optimize picture
quality (page 16).
To optimize "H-Pos", "V-Pos", "Clock"
and "Phase" automatically.
To return your settings to the factory
settings.
Off
Enter To Select Menu To Exit
Off
Enter To Select Menu To Exit
48
48
50
50
Preset
Enter To Select Menu To Exit
48
39