Sansui HDLCD2600 Owner's Manual page 14

Connections to other equipment
To connect the LCD TV to a DTV receiver/set-top box
If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a compo-
nent video cord.
Left Side of the LCD TV
To connect the LCD TV to an HDMI or a DVI device
The HDMI input receives digital audio and uncompressed video from an HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with an HDMI-to-DVI adapter cable, it transfers only the video signal. Sepa-
rate analog audio cords are required.
Left side of the LCD TV
NOTE:
•
If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using a DVI to HDMI
cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture
you must change the output resolution on the external component.
Should you require further instruction, please contact the manufacturer of the external component.
14
To COMPONENT IN
Video cord (not supplied)
Audio cord (not supplied)
To AV2 AUDIO (L/R) IN
To HDMI IN
HDMI cable (type A connector)
HDMI - to - DVI adapter cable
To PC/HDMI
AUDIO IN
To Component OUT
Y
P
B
P
R
To Audio OUT
(not supplied)
or
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
HDMI device
To HDMI out
To DVI output
DVI device