Sansui HDLCD2600 Owner's Manual page 23

NOTE:
• You can also set the sleep timer by
pressing SLEEP on the remote
control.
• After the sleep time is programmed,
the display will appear briefly every 10
minutes and 5 minutes, 1 minute
before to remind you that the sleep
timer is operating.
• To confirm the sleep timer setting,
press SLEEP and the remaining time
will be displayed for a few seconds.
• To cancel the sleep timer, press
ENTER repeatedly to select "Off" in
step 4.
SLEEP
The sleep timer allows you to set a time when the LCD TV auto-
matically switches to standby.
1
Press MENU. The menu screen will appear.
2
Press ▲ or ▼ to select
"Feature" menu, then press
.
3
Press ▲ or ▼ to select
"Sleep Timer".
4
Press or ENTER
repeatedly to select the
desired sleep time (Off, 15
min, 30 min, 45 min, 60 min,
90 min, 120 min, 180 min or
240 min).
5
Press MENU to return to the normal screen.
or
TV operation
Sleep Timer
Picture
Advanced Video Menu
Password Set
Parental Control
Audio
NTSC CC
ATSC CC
Digital Closed Caption
Setup
Feature To Move Enter To Select
Sleep Timer
Picture
Advanced Video Menu
Password Set
Parental Control
Audio
NTSC CC
ATSC CC
Digital Closed Caption
Setup
Feature
To Move Enter To Select
Sleep Timer
Picture
Advanced Video Menu
Password Set
Parental Control
Audio
NTSC CC
ATSC CC
Digital Closed Caption
Setup
Feature To Move Enter To Select
Off
Off
Off
Menu To Exit
Off
Off
Off
Menu To Exit
240 min
Off
Off
Menu To Exit
23