Wolf CFL-WRG Installation And Maintenance Instructions Manual page 6

Standards and regulations
Warnings
6
3. Standards and regulations
The following standards and regulations apply to the ventilation units:
- Machinery Directive 2006/42/EC
- Low Voltage Directive 2014/35/EU
- EMC Directive 2014/30/EU
- ErP Directive 2009/125/EC
- EN ISO 12100
- EN ISO 13857
- EN 349
- EN 953
- VDI 6022
- EN 1886
- DIN ISO 1940-1
- VDMA 24167
- EN 60204-1
- EN 60730
- EN 61000 -6-2+3
- EN 60335-1 (VDE 0700-1)
- VDI 3803
Furthermore, ÖVE regulations and the local building code apply to Austria.
Removal and disabling of safety and monitoring equipment is prohibited. Only operate
the system if it is in technically sound condition. Ensure that any faults or damage that
may impact on safety are rectified immediately.
For installation and maintenance, the following standards and regulations must
be observed:
- EN 50106 (VDE 0700-500)
- DIN VDE 0100
- EN 50110-1 (VDE 0105-1)
- DIN VDE 0105-100
- DIN VDE 0701-0702
- VDI 2050
Safety of machinery;
general design principles
Safety of machinery;
safety distances
Safety of machinery;
minimum gaps
Safety of machinery;
guards
Hygiene requirements for ventilation and
air conditioning systems and units
Ventilation of buildings;
central air handling units
Mechanical vibration;
balance quality requirements
Fans; safety requirements
Safety of machinery;
electrical equipment
Automatic electrical controls
Electromagnetic compatibility
Safety of electrical appliances; general
requirements
Central air conditioning systems -
Structural and technical principles
Safety of electrical appliances; tests
Regulations regarding the installation of
high voltage systems up to 1000 V
Operation of electrical installations
Operation of electrical installations;
general stipulations
Testing following repair and modification
of electrical appliances; repeat testing of
electrical appliances
Requirements for technical equipment
rooms; planning and execution
3065065_201704