Wolf CFL-WRG Installation And Maintenance Instructions Manual page 27

CFL 32 2 persons are required for removing the pan panel.
1. Disconnect trap drain connection
2. Open bypass inspection door
3. Remove pan panel connecting screws (3x)
4. Undo screws at side of pan panel and remove pan panel
5. Slightly loosen tensioning bracket screws
6. Push tensioning bracket upwards
7. Remove first part of countercurrent plate heat exchanger
8. Push further parts along the guide and remove them as well
9. Reassemble in reverse order
1.
4.
3065065_201704
12. Maintenance instructions
Remove pan
panel with two
persons
5.
5.
2.
3.
4.
7.
6.
6.
7.
8.
8.
27