Power Your Radio; Using The Radio For The First Time; Manual Clock Setting - Sangean WR-2 Instruction Manual

Power your radio

AC operation
Before you plug the AC cord into the radio, be sure the AC voltage
is correct. Insert the plug on the end of the supplied power cord
into the AC power socket on the back of the radio.
DC operation
For outdoors use, you can power the radio by using 2V DC input
socket from a DC power supply (example, from the power supply of
vehicles or boats). An AC power adaptor with 1 Ampere and center
positive in polarity can also power the radio in house.

Using the radio for the first time

1. Place your clock radio on a flat surface.
2. Insert the adaptor plug into the AC socket located on the rear of
your radio.

Manual clock setting

. Press Menu button and the display will show 'CLOCK SET'.
2. Press the Tuning control knob to enter the clock setting.
3. Rotate the Tuning control knob to select the desired hour and
press the Tuning control knob to confirm the hour setting. Now the
minute digit will flash.
4. Rotate the Tuning control knob to adjust the minutes and press
the knob to confirm the setting. Now the clock setting is completed.
9