Table of Contents
Advertisement
Section 4
Remove Door Sills & Route Trigger Wires
Step 1
Remove the front door sills on both driver and pas-
senger sides of the vehicle.
Passenger side shown.
P7 - 75152 Rev. C 0416
Installation Instructions - PowerBoard
Step
2
Utility Knife
Step
2
Lift up the carpet.
Slit the rubber grommet in the floor.
Thread the trigger wires through the grommet and
into the passenger compartment.
®
Page 7
© 2016 Bestop, Inc.
Advertisement
Table of Contents
