Battery Installation - Sangean DT-120 Operating Instructions Manual

Battery Installation

Battery cover is located on the back of the
unit. Slide the cover in the direction of the
arrow to gain access to the battery
compartment. Insert one AAA (UM-4) battery
into the compartment. Make sure that the
battery is positioned in accordance with the
indicated diagram. Replace cover.
Note:
1. You can always monitor the battery power
from LCD display battery icon.
When battery power becomes very low
and unable to operate the radio,
low battery indicator
with an " E " appears on the LCD display.
The radio will be shut off.
2. Make sure to replace the battery within
3 minutes. This will prevent any memory
presets from being lost during the battery
replacement.
3
will flash together