Installing The Top Brow Mount And Upper Grill - Pacific energy FP30 Arch Craftsman Installation Instructions Manual

Figure 8: FP30 Craftsman Top Grill mounting screws.

Installing the Top Brow Mount and Upper Grill

1. Clean any debris off of the fireplace front before placing the Top Brow Mount. Insert the tabs located on
each end of the top brow mount into the corresponding cutout in the side brackets. Ensure the top and
sides are flush. The clearance holes for the rivets should be over the rivets. Secure the mount on both
ends. Using a self drilling screw, attach through the holes provided.
2. Attach the Upper Grill by screwing three (3) #8 self drilling screws through the holes in the Grill as well as
the holes in the Top Brow Mount into the fireplace front (Figure 8).
3. The joints and gaps in the wall board can now be filled in, using the board manufacturer's recommended
joint filler/compound.
5055.5154-A
Figure 9: FP 30 Craftsman top grill mount.
1
9
FP30 Arch Craftsman 240417-16