Decorative Finish On The Front; Raised Hearth - Pacific energy FP30 Arch Craftsman Installation Instructions Manual

The the area shown around the front (Figure 12) can be only be finished with non combustible materials
only.
The area within the dashed line next to and below the Side Brackets cannot be thicker than 5/8" including
the non-combustible wall board. If there is anything thicker in this area, the decorative front will not be able to
mount on the brackets.
Non-combustible facing materials only in this area
Side
bracket
1"
]
[25mm
Figure 12: FP30 Craftsman Front border area.
Non-combustible Hearth
Maximum nished height:
7" [178mm] from base
of unit
Figure 13: FP30 Craftsman front hearth height.
5055.5154-A

DECORATIVE FINISH ON THE FRONT

47-1/2"
]
[1.21m
2-1/4"
[57mm
11
Side
bracket
1"
]
[25mm
]

Raised Hearth

If you are installing a raised hearth
with this unit, it must be made
entirely of non combustible materials.
The maximum height for the hearth is
7" [178mm] from the base of the unit
(Figure 13).
FP30 Arch Craftsman 240417-16
51-3/4"
]
[1.315m