Table of Contents
Advertisement
Quick Links
IMPORTANT:
THESE INSTRUCTIONS ARE TO
REMAIN WITH THE HOMEOWNER.
PLEASE SAVE THESE
SAFETY NOTICE
If this stove is not properly
installed, a house fire may result.
For your safety, follow the instal-
lation instructions. Contact local
building or fire officials about
restrictions and installation
inspection requirements in your
area.
Visit www. pacificenergy.net for the most up-to-date version of this manual
240417-16
INSTRUCTIONS.
FP30 ARCH
CRAFTSMAN SURROUND
For use only on MODEL:
FP30AR Series B
FP30 Arch Craftsman
INSTALLATION
INSTRUCTIONS
5055.5154
Advertisement
Table of Contents
Summary of Contents for Pacific energy FP30 Arch Craftsman
- Page 1 FP30 ARCH CRAFTSMAN SURROUND For use only on MODEL: FP30AR Series B Visit www. pacificenergy.net for the most up-to-date version of this manual 240417-16 FP30 Arch Craftsman 5055.5154...
-
Page 2: Table Of Contents
This Installation requires the use of a chase air inlet to supplement the air required for both natural and forced convection through the unit. The Top Brow Mount and Side Brackets must be in place before placing the non-combustible board on the front of the fireplace. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 3: Safety Notice
Failure to follow the instructions in this manual and those in the FP30 AR Series B Owners Manual, may result in property damage, bodily injury, or even death. WARNING HOT GLASS WILL CAUSE BURNS. DO NOT TOUCH GLASS UNTIL COOLED. NEVER ALLOW CHILDREN TO TOUCH GLASS. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 4: Clearances
84” (2.135m) ** Minimum depth of (UL1618 Class 1) non-combustible Ember Protection from the front 18” (460mm) of the fireplace Minimum width of (UL1618 Class 1) Ember Protection: In Canada 58” (1.47m) :In U.S.A. 39” FP30 Arch Craftsman 240417-16 5055.5154-A... - Page 5 14”(355mm) (A) 51 3/4”(1.315m) (B) 5”(127mm) 52 3/4”(1.34m) 6”(150mm) 16”(406mm) 53 3/4”(1.365m) 7”(178mm) 54 3/4”(1.391m) 8”(203mm) 18”(457mm 55 3/4”(1.416m) 9”(229mm) 56 3/4”(1.441m) 10”(254mm) 20”(508mm) 57 3/4”(1.467m) 11”(279mm) 58” 3/4”(1.492m) 12”(305mm) 22”(560mm) (C) 59 3/4”(1.518m) (D) FP30 Arch Craftsman 240417-16 5055.5154-A...
-
Page 6: Assembly - Installation
Side Bracket to the fireplace front using the holes provided in the bracket. 5. Gently tighten all screws 6. Repeat the process on the other side. Figure 4: FP30 Craftsman side bracket screws. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 7: Attaching The Front Wall Board
Make sure you can see the [660mm] pencil line for the Brow as this 35-5/16” will mean you have enough [897mm] clearance to mount the Top Brow. 4-1/2” 40” [115mm] [1.016m] 9-5/16” [236mm] Figure 6: NC board cutout. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 8: Chase Inlet
Air can be drawn from under the chace if that space is sealed within the house enve- lope. The air must come from inside the house, preferably the room the fireplace is installed in. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 9: Installing The Top Brow Mount And Upper Grill
Top Brow Mount into the fireplace front (Figure 8). 3. The joints and gaps in the wall board can now be filled in, using the board manufacturer’s recommended joint filler/compound. Figure 9: FP 30 Craftsman top grill mount. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 10: Attaching The Lower Grill
3. Lift up slightly on one end of the Ash Shelf for clearance, hook the grills corresponding mounting slot over the screw head. 4. Repeat the process on the other side. Tighten the screws using a 3/8:” socket or nut driver. Figure 11: FP30 Craftsman lower grill mount tab. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 11: Decorative Finish On The Front
The maximum height for the hearth is Non-combustible Hearth 7” [178mm] from the base of the unit (Figure 13). Maximum nished height: 7” [178mm] from base of unit Figure 13: FP30 Craftsman front hearth height. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 12: Installing The Front
In the door opening behind the Front, there are four screw holes. These may require the door to be removed ( open door and lift up on hinge side) to see and access them clearly. Figure 15: Openings for the front tabs and the position of the screws. FP30 Arch Craftsman 240417-16 5055.5154-A... -
Page 13: Parts
Lower Grill Assembly FP30.RP777101 Front Assembly FP30.RP777104 Upper Decorative Panel FP30.RP777103 Lower Decorative Panel INCLUDED FASTENERS 1/4- 20 type F screws #8 self drilling screws x 15 #8-32 Black Thread rolling screws 7/32” Drill Bit FP30 Arch Craftsman 240417-16 5055.5154-A... - Page 14 FP30 Arch Craftsman 240417-16 5055.5154-A...
- Page 15 FP30 Arch Craftsman 240417-16 5055.5154-A...
- Page 16 © 2017 Copyright Pacific Energy Fireplace Products LTD Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. PACIFIC ENERGY FIREPLACE PRODUCTS LTD. 2975 Allenby Rd., Duncan, B.C. V9L 6V8 For technical support, please contact your retailer.