Security; Advanced; Save Settings - Avtech Room Alert User Manual

Room Alert Signal Tower
Additional Screens And Interfaces

Security

The 'Security' section is used to configure password security for access to the Room Alert Signal
Tower Settings Screen and telnet configuration menu. Passwords can ONLY contain the alphanumeric
characters '0-9', 'a-z' and 'A-Z'. Spaces, symbols, and punctuation are not supported. Be sure to record
the password entered here in a safe place.
NOTE: If this password is lost or misplaced, the only way to restore access to the Settings screen is to reset factory default
settings. Be sure to record the password in a safe place.

Advanced

The 'Advanced' tab of the Room Alert Signal Tower 'Settings' screen is used to configure additional
settings such as the Time & Date and Temperature Scale. The temperature scale selected will be used
as the default display on the Status screen and for entering sensor thresholds. If you wish to modify the
time display on the 'Status' screen to your local time zone, use the drop down box to select your local
time zone, and check the 'Daylight Savings' checkbox if applicable. The 'Time Server IP' field can
be used to manually enter a specific time server to use for the time display if access to the Internet is
restricted or not available and a time server is available for use on the local network.
NOTE: If Daylight Savings Time is used in your location, be sure to toggle the 'Daylight Savings Time' checkbox when setting
your clock forward in the Spring and backward in the Fall.

Save Settings

After making changes to each section of the Settings, click the 'OK' button at the bottom of each screen
to temporarily save the settings. When finished configuring the settings, click the 'Save Settings' link on
the left menu to save the configuration to the device and reboot with the new settings. If the browser is
closed or the Settings page is left before clicking 'Save Settings', any changes made will be discarded.
AVTECH Software Inc.
21