Configuration; Alert Methods; Email - Avtech Room Alert User Manual
Signal tower real-time event alerting with signal lights, temperature & sensor monitoring
Hide thumbs
Also See for Room Alert:
- User's manual & reference manual (32 pages) ,
- User's manual & reference manual (29 pages)
Table of Contents
Advertisement
Room Alert Signal Tower
Configuration & Setup Screens
Configuration And Setup Screens
Alert Methods
The Room Alert Signal Tower unit can send alert notifications via email and email-to-SMS using
anonymous SMTP relay and/or SNMP Traps. The Room Alert Signal Tower unit is fully SNMP
compliant and can be accessed by any application that can issue a SNMP Get request. PageR can
therefore be used to perform SNMP Get requests and receive SNMP Traps.
The 'SMTP Email' section displays settings to allow Room Alert Signal Tower to send Email Alert
Notifications when alert thresholds are exceeded. In order to enable email alerting from the Room Alert
Signal Tower web server interface, your mail server must have 'SMTP Relay' enabled for either your
network or the IP address of the Room Alert Signal Tower ID Box. Contact your Network Administrator
if you need assistance in doing this.
AVTECH Software Inc.
10
Advertisement
Table of Contents
Need help?
Do you have a question about the Room Alert and is the answer not in the manual?