Safety Information - Secret Lab THRONE V2 Series Assembly Manual

BACKREST RECLINE
Pull the lever FULLY and lean back slowly until
desired angle is achieved.
MULTI-TILT MECHANISM
Right lever: Pull up to adjust height.
Left lever: Lock/unlock the tilt mechanism.
TILT TENSION
Turn the knob clockwise to loosen
the rocking tension of the chair,
anti-clockwise to tighten. Adjust
according to your weight.
The recommended weight load for 100kg (220lbs) for the Throne V2, 110kg (240lbs) for the OMEGA series, and 130kg (290lbs) for
the TITAN. The chair should only be used normally and in a non-abusive manner. For warranty information, please visit the Warranty
section on our website.
USAGE INFORMATION
ARMREST ADJUSTMENT
The distance between armrests
can be adjusted. Loosen the
screws and move to the desired
position, then tighten to secure.

SAFETY INFORMATION

4D ARMRESTS
Press each button and adjust accordingly. To
adjust the angle, simply push in either direction.
FULL-TILT MECHANISM
Right lever: Pull up to adjust height. Push
inwards to lock the tilt mechanism
LUMBAR ADJUSTMENT
Turn the knob clockwise to raise
the lumbar support, anticlockwise
to lower. Do not attempt to turn
past the maxmium and minimum.
TITAN ONLY