Maintenance; Inspecting And Cleaning The System; Cleaning Optical Tips - GE XL Lv Manual

7

Maintenance

Inspecting and Cleaning the System

Inspect and clean the XL Lv system before and after each use with a soft cloth and a 70%
alcohol-to-water solution. If using the system in a dirty environment, clean the components more
frequently, as needed.
If damage is found, contact GE Sensing and Inspection Technologies for return instructions and
an RMA (return material authorization) number. Early detection of minor conditions can prevent
costly repair.

Cleaning Optical Tips

Dirty optical tip surfaces cause distorted or blurred images. For best image quality, clean the
optical tip and camera head frequently.
To clean the probe tip, including the lens on the camera head, use glass cleaner or 70%
alcohol-to-water solution and a pointed cotton swab. Three surfaces need cleaning: the head
can optics, the outside of the tip, and the inside of the tip.
84