GE XL Lv Manual page 29

Tip Tool Proper Use (3.9 mm only)
Removing Tips
1. Apply empty tip tool to probe head.
2. Apply pressure while turning in the counter-clockwise position.
3. When tip tool spins freely, gently pull up while twisting in the counter-clockwise position to
release the second set of threads.
4. Remove tip tool and tip will be within.
Applying Tips
1. Apply tip tool containing appropriate tip to probe head.
2. Apply pressure while turning in the clockwise position.
3. When tip tool spins freely, gently push down while twisting in the clockwise position to engage
the second set of threads.
4. Pull gently on tip tool to ensure proper attachment.
5. Remove tip tool and tip will be attached to probe head.
NOTE: Never use excessive force to install or remove an optical tip.
32