Victaulic FireLock 912 Installation Instructions Manual

Installation INSTRUCTIONS
FireLock ® Low-Profile Sprinkler Outlet-T
STYLE 912
• Read and understand all instructions before attempting to install any Victaulic piping products.
• Wear safety glasses, hardhat, and foot protection.
• Depressurize and drain the piping system before attempting to install, remove, adjust, or maintain any Victaulic piping products.
Failure to follow these instructions could result in serious personal injury and/or property damage.
The Style 912 FireLock ® Low-Profile Sprinkler Outlet-T is designed for direct connection of sprinkler heads and is FM Approved up to
300 psi/2068 kPa and VdS and LPCB Approved up to 16 Bar/232 psi at ambient temperatures that are typical for fire protection systems.

PRODUCT DATA

Y
V
W
www.victaulic.com
VICTAULIC IS A REGISTERED TRADEMARK OF VICTAULIC COMPANY. © 2008 VICTAULIC COMPANY. ALL RIGHTS RESERVED. PRINTED IN THE USA.
REV_A
Warning
Nominal Size
inches/Actual mm Diameter
+0.06/+1,5
Run x Branch FPT† –0.00/–0,0
1 1/2
x
33.7 15.0
Z
1 1/4 1/2
x
42.4 15.0
1 1/2 1/2
x
48.3 15.0
† Style 912 Low-Profile Sprinkler Outlet-T products are designed with female threads to ISO 7-Rp 1/2
(Rp 1/2 BSPP per BS21) and can accommodate only male sprinkler threads.
FOR SPRINKLER USE ONLY. DO NOT USE AS A BRANCH OUTLET.
Hole
V W
15/16 1.00 0.90
24.0 25.4 22.9
15/16 1.17 1.10
24.0 29.8 27.9
15/16 1.29 1.22
24.0 32.8 31.0
I-912
Approximate
Weight Each
Y Z lbs/kg
3.72 1.50 0.67
94.6 38.1 0.30
4.12 1.50 0.74
104.7 38.1 0.33
4.32 1.50 0.76
109.8 38.1 0.34
I-912_1