Advertisement
15
Route the harness underneath the smog pump and connect the harness into the smog pump connector. Install the smog pump onto
the grommets.
16
Rotate the smog pump hose pump hose at the engine
inlet until there are no kinks and reconnect the hose into
the smog pump.
Tool Required: Pliers
18
Remove the two brackets securing the AC line hose clips. Remove the bolt mounted to the chassis on each bracket. Only the bolt
from the left AC line bracket will be reused in Step 30. Remove the lock nuts securing both the rubber spacers to the hose clips.
Once everything is removed, install the rubber spacer with the AC line clips into the chassis and tighten with one of the locknuts
removed.
Tool Required: 10mm Socket/Wrench
WILL BE REUSED
BEFORE
REMOVE COMPLETELY
17
Reinstall the smog pump cover.
RUBBER SPACER
8
AFTER
SBFILTERS.COM
Advertisement
