Related Manuals for S&B Filters 75-5039
Summary of Contents for S&B Filters 75-5039
- Page 1 INSTALLATION INSTRUCTIONS: INSTALLATION INSTRUCTIONS: P/N: 75-5039/75-5039D 15461 SLOVER AVE., FONTANA, CA 92337 | PH: 909.947.0015, FAX: 909.947.0603 | WWW.SBFILTERS.COM...
-
Page 2: Vehicle Application
Thank You! for purchasing your new S&B Filters intake kit. If at any time you need additional assistance with installation or have any other questions or comments, feel free to call our customer service department at 909-947-0015. You can also take advantage of our live chat at www.sbfilters.com and connect with an S&B representative immediately. -
Page 3: General Information And Warnings
GENERAL INFORMATION AND WARNINGS Operation in snow and rain If you are driving in heavy snowfall or extreme rain conditions, you should always check for accumulated snow and water on the air filter following your OE recommendations for driving in these conditions. The following is recommended after operating the vehicle up to 100 miles in heavy snowfall or extreme rain: At the earliest opportunity, open the hood and check the air box and filter. -
Page 4: Exploded View
EXPLODED VIEW:... - Page 5 PARTS LIST: 75-5039/75-5039D ITEM DESCRIPTION PART NUMBER HARDWARE PACKS AIRBOX AL1326B-00 HP1541-00 AG1019-00 SILICONE FILTER KF-1056 AG1018-00 AI1038-01 FENDER SEAL AI1580C-00 HP1407-00 TUBE GROMMET AI1593-00 AI1837-00 AI1822-00 SILICONE COUPLER Al1581C-00 AI1823-00 HP1543-00 SILICONE HOSE AI1038-01 AI1110-00 AG1013-00 HOSE ADAPTER AI1110-00...
-
Page 6: Installation Steps
INSTALLATION STEPS: With the ignition switched off and the parking brake set, disconnect Disconnect MAF sensor and vacuum lines from the stock the negative battery cable on the passenger side then remove the intake tube. engine cover. Note: Failure to disconnect the battery may cause the CEL to illuminate upon completion of the installation and subsequent operation. - Page 7 Install MAF Sensor, Plate (M), and Gasket onto Intake Install Grommet and Hose Adapter into Intake Tube Tube with provided Hardware (P). (N). The large side of the adapter goes into the intake tube Tool Required: Phillips Screwdriver grommet. Install Hose Adapter into Hose (F).
- Page 8 INSTALLATION STEPS: Install Tube Seal onto Air Box (A). Install Fender Seal onto Air Box (A). (Optional): Determine if you want to install the Box Plug Install Airbox into the vehicle. Apply Threadlocker (AA) to the threads on the remaining two M6 Bolts (Q). Tighten the bolts with onto the Air Box (A).
- Page 9 ...continued from Step 18a Secure vacuum hoses onto Intake Tube and tighten Hosclamp for Hose and pushing the smaller hose onto Hose Adapter (J). Ensure Adapter is properly seated in Tube Grommet (D). Reconnect MAF sensor harness to MAF sensor. Install Filter onto Intake Tube and tighten the...
- Page 10 INSTALLATION STEPS: Reconnect negative battery terminal. Reinstall the stock engine cover. Tool Required: 10mm Socket/Wrench Inspect your installation, make sure the kit is properly positioned and all fasteners are secure. Keep all stock parts in case you would ever need to reinstall the stock intake assembly.
- Page 11 RELATED ITEMS FOR YOUR PURCHASE Order Online today at www.sbfilters.com or through your local S&B distributor. Filter Wrap Replacement Replacement Precision II: Cotton Filter Dry Filter Cleaning & Oil Kit SKU# WF-1034 SKU# KF-1056 SKU# KF-1056D SKU# 88-0008 SBFILTERS.COM...
- Page 12 15461 SLOVER AVE., FONTANA, CA 92337 | PH: 909.947.0015, FAX: 909.947.0603 | WWW.SBFILTERS.COM...
Need help?
Do you have a question about the 75-5039 and is the answer not in the manual?
Questions and answers