Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for S&B Filters 75-5105
Summary of Contents for S&B Filters 75-5105
- Page 1 INSTALLATION INSTRUCTIONS: P/N: 75-5105 / 75-5105D...
-
Page 2: Vehicle Application
Thank You! for purchasing your new S&B Filters intake kit. If at any time you need additional assistance with installation or have any other questions or comments, feel free to call our customer service department. You can also take advantage of our live chat and connect with an S&B representative immediately. -
Page 3: Performance Testing
RELATED ITEMS FOR YOUR PURCHASE Filter Wrap Replacement Replacement Precision II: Cotton Filter Dry Filter Cleaning & Oil Kit SKU# WF-1031 SKU# KF-1051 SKU# KF-1051D SKU# 88-0008 Air Box Plug Testing Stock air boxes are a significant contributor to poor air flow which is why S&B designs custom air boxes with secondary and/or enlarged openings. -
Page 4: Exploded View
EXPLODED VIEW:... - Page 5 PARTS LIST: 75-5105/75-5105D ITEM DESCRIPTION PART NUMBER HARDWARE PACKS AIR BOX AL1303B-00 HP1475-00 CLEAR LID AI11974-00 AG1007-00 INTAKE TUBE AL1303-00 AG1019-00 TUBE SEAL AI1972C-00 HP1477-00 AIR FILTER KF-1051 AI1252-00 COUPLER AI1316C-00 AI1973-00 MAF GASKET AI1345-00 AI1345-00 MAF PLATE AI1973-00 HP1474-00...
-
Page 6: Installation Steps
INSTALLATION STEPS: With the ignition switched off and the parking brake set, disconnect the Disengage the red locking clip, press down on the tab, then negative battery cable on both batteries. Note: Failure to disconnect pull out to disconnect the MAF sensor harness from the the battery may cause the CEL to illuminate upon completion of MAF sensor. - Page 7 Install the Tube Seal onto the Air Box (A). Determine if you want to install the Box Plug onto the Air or leave it open. See the “Air Box Plug” note on Page 2 for more information. If the Box Plug is desired, simply press the Box Plug into the box opening until it snaps into place.
- Page 8 INSTALLATION STEPS: Insert the Vent Hose with the two #16 Hose Clamps Install the Air Filter onto the Intake Tube and tighten into the oil canister and Intake Tube (C). Tighten all hose the #88 Hose Clamp (O). clamps. Tool Required: 5/16”...
- Page 9 Reconnect the MAF sensor harness into the MAF sensor Reconnect the negative terminal on both batteries. Inspect your installation, make sure the kit is properly positioned and all and engage the red locking clip. Reconnect the sensor fasteners are secure. Keep all stock parts in case you would ever harness into the filter minder.
Need help?
Do you have a question about the 75-5105 and is the answer not in the manual?
Questions and answers