Samsung WF419AAUXAA User Manual page 19

Digital graphic
2
display
Wash Option
3
selection
buttons
ActivFresh™
4
button
Temperature
5
selection button
Spin selection
6
button
Soil Level
7
selection button
Steam selection
8
button
Start/Pause
9
selection button
Power button
10
WF419AAW-02657A-02_EN.indd 19
Displays the remaining cycle time, all cycle information, and error messages.
Press these buttons to select different cycle options.
Pre Wash - To use this feature add detergent to the pre wash section of the
detergent compartment. When turned on, the washer fills with cold water and
detergent, tumbles, then drains and advances to the selected wash cycle.
Some cycles cannot be selected with with this option (See page 33).
You cannot select the prewash option in the Delicate, Wool, Quick
Wash, Hand Wash, Rinse+Spin, and Spin Only cycles.
Extra Rinse - Add an additional rinse at the end of the cycle to more
thoroughly remove laundry additives and perfumes.
Extended Spin - Add additional time to remove more water from loads.
My Cycle - Choose your favorite cycle including temperature, spin, soil level, option, etc.
Delay Start - Any cycle can be delayed for 1 to 24 hours in one-hour
increments. Displayed hour indicates the time at which the wash will be started.
Signal On/Off - Press the button to turn on or turn off the signal.
Press this button to sanitize your laundry in cold water.
Active silver ions are produced from pure silver plates by the process of
electrolysis and released into the wash water effectively sanitizing your wash,
even in cold water, without bleach. The ActivFresh™ system sanitizes while
using 92% less energy use than traditional heat sanitization.
Press the button repeatedly to cycle through the different water temperature options.
Extra Hot/Cold - Heavily soiled, colorfast items. Only available with the Sanitize cycle.
Hot/Cold - Whites and heavily soiled, colorfast items.
Warm/Warm - Colorfast items. When warm rinse is selected, only the final rinse will
be warm.
The other rinses will be cold to conserve energy.
Warm/Cold - Moderately soiled, colorfast items; most wrinkle-free items.
Cold/Cold - Brightly colored, very lightly soiled items.
Press the button repeatedly to cycle through the different spin speed options.
Extra High - Removes more water from loads during spin.
To minimize wrinkling of wrinkle-free and no-iron fabrics, DO NOT use
the Extra High spin option for these loads, nor overload your washer.
High - Use for underwear, t-shirts, jeans and sturdy cottons.
Medium - Use for jeans, wrinkle-free or wash-and-wear items and synthetics.
Low - Use for delicate items needing a slow spin speed.
No Spin - Drains your washer without spinning. Use for extremely delicate
items that cannot tolerate any spin.
Press the button to select the soil level/washing time.
(Heavy    Normal    Light)
Heavy - For heavily soiled loads.

Normal - For moderately soiled loads. This setting is best for most loads.

Light - For lightly soiled loads.
Press this button to use the Steam Wash function. Steam Wash is available
with Heavy Duty, Normal, Perm Press, Sanitize, Bedding cycles. For heavily
soiled, colorfast garments, Steam Wash improves stain treatment and use
less water of each cycle (See page 33).
Press to pause and restart programs.
Press once to turn your washer on, press again to turn your washer off. If
the washer is left on for more than 10 minutes without any buttons being
touched, the power automatically turns off.
setting up your new washing machine _19
2009-11-13 ¿ÀÀü 10:37:21