Microwave Drawer - Sharp SMD2480CSC Operation Manual

OTHER FEATURES
CONTROL LOCK
The Control Lock prevents unwanted drawer operation such
as by small children. The Microwave Drawer can be set so
that the control panel and the automatic door mechanism are
deactivated or locked.
TO LOCK
Touch STOP/CLEAR pad and hold for 3 seconds. The
display shows
.
LOCK ON
TO UNLOCK
Touch STOP/CLEAR pad and hold for 3 seconds. The
display shows
LOCK OFF
The Control Lock is canceled when the electrical power supply
to your oven is interrupted. Set the Control Lock again when
power to the oven is restored.
HELP
Each setting of Popcorn, Reheat, Cook, Defrost and Beverage
has a cooking hint. If you wish to check, touch TIMER/
SETTINGS whenever HELP is lighted in the Interactive
Display for these and other manual operation hints.
+30 SEC
+30 SEC allows you to cook for 30 seconds at 100% by
simply touching the +30 SEC pad. You can also extend
cooking time in multiples of 30 seconds by repeatedly
touching the +30 SEC pad during manual cooking.
Note:
• To use +30 SEC, touch pad within 3 minutes after cooking,
closing the drawer or touching the STOP/CLEAR pad.
• +30 SEC cannot be used with Sensor settings, REHEAT
or DEFROST.
MORE OR LESS TIME ADJUSTMENT
Should you discover that you like any of the REHEAT or
DEFROST settings slightly more done, touch the POWER
LEVEL pad once after touching your selection. The display
will show .
MORE
For slightly less done, touch the POWER LEVEL pad twice
after touching your selection. The display will show
E
.
.
LESS
EASY WAVE OPEN BLUE LED INDICATOR
OFF
• Out of the box
• Control Lock
• User selects OFF
• Drawer is at full open position
BLUE LED ON
• Easy Wave Open is active
• On when fully closed
• On when cooking
BLUE LED FLASHING
• Drawer is opening - flashing 0.5 seconds off, 0.5 seconds on
MULTIPLE SEQUENCE COOKING
Your Microwave Drawer can be programmed for up to 4
automatic cooking sequences, switching from one power
level setting to another automatically.
Sometimes cooking directions tell you to start on one
power level and then change to a different power level. Your
Microwave Drawer can do this automatically.
1 First enter cooking time. Then touch POWER LEVEL
pad once for 100% cooking or repeat touching POWER
LEVEL pad for a lower power level.
2 Enter second cooking time. Repeat touching POWER
LEVEL pad for desired level. You can follow this procedure
up to 4 times.
TOUCH
3 Touch START/+30 SEC pad.
Note:
• If POWER LEVEL pad is touched once,
be displayed.
• If 100% is selected as the final sequence, it is not necessary
to touch the POWER LEVEL pad.
• If you wish to know power level during cooking, simply
touch the POWER LEVEL pad. As long as your finger is
touching the POWER LEVEL pad, the power level will
be displayed.
18
START
HIGH
will