Sharp Microwave Drawer SMD2443JSC Installation Manual

Sharp Microwave Drawer
SPECIAL WARNING
Installation and service must be performed by a qualified
installer.
IMPORTANT: Save this installation manual for local
electrical inspector's use and future reference.
CLEARANCES AND DIMENSIONS
Do not install this appliance in any combustible cabinetry,
which is not in accord with the stated clearances and
dimensions on pages 2–5. See Figures 1–7.
SAFELY LIFT AND MOVE UNIT
Two people are required to safely lift and move this unit.
UNPACKING THE APPLIANCE
• Remove all packing materials from inside the Sharp Microwave
Drawer Oven. DO NOT REMOVE THE WAVEGUIDE
™
COVER, which is located on the top of the Sharp Microwave
Drawer Oven.
™
• Remove the protective film from the touch control area. Addition-
ally, remove the feature sticker, if there is one. Check the drawer
for any damage, such as misaligned or bent drawer, damaged
drawer seals and sealing surfaces, broken or loose drawer guides
and dents inside the cavity or on the front side of the drawer. If
there is any damage, do not operate the Sharp Microwave Drawer
Oven and contact your dealer or a Sharp authorized servicer.
TINSEB626MR R0
INSTALLATION MANUAL
Sealing
Surface
Waveguide
Cover
Sealing
Surface
Oven
Cavity
Oven: SMD2443JSC
™
IMPORTANT NOTES TO THE INSTALLER
• Read the entire Installation Manual before installing the Sharp
Microwave Drawer
• Remove all packing material before connecting the electrical
supply. Manually pull open the drawer to ensure all packing
material is removed prior to connection and installation.
• Observe all governing codes and ordinances.
• Leave these instructions with the consumer.
IMPORTANT NOTES TO THE CONSUMER
Keep this manual with your Operation Manual for future reference.
• Read and follow the safety precautions listed in the operation
manual.
• Ensure your Sharp Microwave Drawer
grounded properly by a qualified installer or service technician.
IMPORTANT SAFETY INSTRUCTIONS
WARNING If the information in this manual is not followed
exactly, a fire or electrical shock may result that could cause property
damage, personal injury or death.
WARNING To reduce the risk of tipping, the Sharp Microwave
Drawer Oven must be secured by a properly installed Anti-Tip block.
™
• This appliance must be electrically grounded in accordance with
local codes.
• Ensure the wall coverings and the cabinets around the appli-
ance can withstand the heat generated by the Sharp Microwave
Drawer Oven.
™
WARNING
Never leave children alone or unattended
in the area where the Sharp Microwave Drawer™ Oven is
in use. Never leave the drawer open when the appliance is
unattended.
WARNING
Stepping, leaning or sitting on the drawer may
result in serious injuries and can also cause damage to the
Sharp Microwave Drawer
• Do not use the Sharp Microwave Drawer
™
as this creates a potentially hazardous situation.
• Check that the time-of-day is in the display. If not, touch STOP/
CLEAR for safety reasons and to prevent unintended use.
1 1
Oven.
™
Oven is installed and
™
Oven.
™
Oven as a storage space,
™
E