Kohler K-5402A-0 Homeowner's Manual page 14

Auto Energy Saving Function
• The toilet shall auto-detect idleness if energy saving function is ON, and decrease seat temperature for energy saving.
• Refer to page 8 for setting the energy saving feature.
Service and Cleaning
A) Regular clean
For best results, keep the following in mind when caring for your KOHLER product:
IMPORTANT! Do not rinse cover directly (including remote).
•
Inspection
• Do not allow cleaners to soak on surface – do not allow cleaners to soak the product.
• Do not use abrasive material – use a soft, damp sponge or cotton cloths. Never use an abrasive material
such as a brush or scouring pad to clean surfaces.
• Wipe surface – wipe surfaces clean and rinse completely with water immediately after applying cleanser. Rinse
and dry any overspray that lands on nearby surfaces.
Cleaning seat
Do not use abrasive detergent and sterilizing aerosol spray products.
•
• No corrosive chemical products or cosmetics (such as nail polish or aftershave solution) allowed
to come into contact with the seat as it may cause surface damage.
NOTE: Not following these cleaning instructions could void the Kohler warranty.
Cleaning success shall be determined by water hardness and temperature, accurate quantities and cleaning
NOTE:
specification modification.
NOTE: Do not use excessive force when cleaning cover and seat to prevent product damage.
1274372-A05-B June 2016
– always test your cleaning solution on an inconspicuous area before applying to the entire surface.
Caring indication: use detergent and water
mixture or any other detergent listed for seat
cleaning products to clean seat; use a soft,
dampened sponge or cloth. Wipe away and dry
with soft towel, leave to dry naturally in the air.
14 Kohler Co.